To access Device Settings, go the App and it should appear at the bottom.
Make sure your phone and Monimoto are in bluetooth range and bluetooth is turned ON.
Once you connect via Bluetooth, you can see all of the expanded settings:
Monimoto Device Settings
Vehicle Name - here is what your Monimoto is labelled in the App
License Plate number - here you can enter the plate number of your vehicle
Vehicle Picture - here you can assign a picture of your vehicle for easy recognition
Profile - this determines the motion sensitivity based on vehicle/asset type: Motorcycle/Car/Bicycle/Boat/Other
Movement Detection Level - this further tweaks the motion sensitivity level of the tracker, Low is the least sensitive to movement (less easy to alarm), maximum is high sensitivity to movement (more easy to alarm)
Regular Ping Interval - this sets the frequency interval between each regular ping update you receive, from once everyday to once every 40 days, we recommend keeping it on default once per day setting
Include location with regular ping - this means your device will attempt to send a location update with every regular ping
Manage Key Fobs - Add or remove Key Fobs to your tracker using this menu.
Diagnostics - use this only if you are experiencing technical issues. Press Start Logging and your device will begin recording detailed logs, then afterwards you can use Send Diagnostics Data to open a ticket to the support team with the logs attached.
Test Device Connection - use this to push your device to attempt connection with the network and update its status.
Turn Monimoto Off (M9 only) - this shuts off your M9 device, in order to turn it on again just plug-in the USB-C charging cable, that is the only way to turn it on. You cannot turn on an M9 from the App if it has been turned off, only charging cable.
Device Info - Lists BLE (Bluetooth) identifying name, ICCID of the device's sim card, IMEI number of the device, and firmware version.
Unpair - unpairs the device from your account, the device will then be free for a new setup with another account.
Delete - (only if Bluetooth connection is not possible, then the delete option appears instead of unpair, this allows you to remove the device from your account. However if a device is removed from the account using deletion, it will need to be manually reset to default before it can be setup with a new account.