This just means that during an alarm test you have not yet received GPS locations. Once a GPS location is received during a test this notification disappears.
Make sure you are testing a long enough alarm (10 min. minimum) to receive a GPS location, if an alarm is triggered but then too quickly disarmed by the Key Fob or Bluetooth connection to the App then it will not be able to send a location to you.
If you do not receive GPS locations, please check the following tips:
1. Make sure the front side is directed either sideways or up towards the sky - if it is facing down to the ground then it will have difficulty finding satellites.
2. Make sure no metal is contacting front side of the device, it will directly cause interference
3. When testing an alarm you must do so by simulating an actual theft where you ride with the motorcycle outside on the street for about 10-15 minutes. If the device is located inside a building/garage/workshop/underground during the alarm test then it will not get GPS signals and instead rely on GSM approx triangulation locations. Buildings cause interference to GPS signals.
4. If the device is surrounded on all sides by lots of metal, it could interfere with its ability to get signals, try different positions in the motorcycle. Usually it takes some experimentation to find a good location where it is hidden and also able to receive GPS signals.