How to reset your Monimoto device to its default factory settings?

FOR MM1/MM2

Watch this video to see how it is done: 

1. Ensure batteries are inserted into your Monimoto.

2. Connect Monimoto to your computer or phone charger using a micro USB data cable.

3. Wait while the red LED flashes repeatedly at least ~13 times (1 flash per sec.).

4. Unplug the micro USB cable and you should see one long LED flash for about 5 seconds.

5. Monimoto will restart.

6. Parameters have been successfully reset to default.

If you are getting one continuous red LED flash, it means your Monimoto is plugged in without batteries or batteries are low. In that case please put new batteries in and try once again.

For MM5/MM6

1. Ensure batteries are inserted into your Monimoto.

2. Press and hold the little reset button next to the SIM card for at least 3 seconds. 

3. After releasing the button, the Red LED should start blinking, quickly followed by a Green LED flash after about 3 seconds.

4. This will reset the device to default mode.

For M7

1. Ensure batteries are inserted into your Monimoto.

2. Press and hold the little square reset button on the back of the device above the batteries for 3 Red LED Flashes.

3. After releasing the button, the Red LED will flash quickly followed by a Green LED flash.

4. This will reset the device to default mode.