If you keep the vehicle near your house, within 50 meters (160 ft) - make sure that the key fob and the device do not keep the connection between them. If this is the case, the alarm will not start until the bike is out of the connection range.

If your bike is outside and the key fob is inside, the connection range can vary from a few meters to 30 meters (100 ft), as the walls and other objects will impact it. It is rare that the key fob is able to connect to the Monimoto device if they are more than 15 meters (50 ft) away from each other, as walls and windows significantly limit the radio signal.

Luckily, the key fob range can now be reduced. This will allow you to make sure that the Monimoto and the key fob are not connected when you park your vehicle near your home or office.

This works for MM5 and MM6 models from firmware version

To reduce the range, park your vehicle, put your key fob in place where you usually keep it. 

Go to Settings -> Connect -> Key fobs and slightly reduce the distance.

The Key fob will restart and you will be able to see if the key fob still connects.

If it still connects, reduce the signal again until the Monimoto device is no longer linked to the Key fob. 

Note. Reducing the distance increases the chances of a false alarm being triggered while driving.

How to test if Monimoto is an older model like MM1, MM2? 
Leave the key fob at home where you usually keep it. Go to your bike do this:

Go to Settings -> Connect -> Key fobs and check if the key fob shows any signal. Refresh by swiping down if needed.

If the connection is still present - we suggest that you find another place at home to keep your key fob or simply place the key fob in a metal box.